For sales and support
Call:0161 480 8800
Contact for availability
Share:
Comes equipped with 4 x 140mm high airflow PWM fans that provide strong out-of-box cooling performance.
Comes equipped with 3x 140mm ARGB PWM fans that have similar performance as the LANCOOL III RGB 140mm back PWM Fan.
Offering 7 colors and 8 lighting modes (the 8th mode is MB SYNC), the included ARGB controller can be operated via the front IO C and M buttons and can extend its control for 3 additional ARGB devices.
A fine mesh design has been implemented at the front, top, and both bottom side panels of the LANCOOL III.
The two bottom side panels provide sufficient airflow to efficiently cool the GPU when fans are installed above the PSU shroud.
The 51% porosity offers an ample direct fresh air intake.
The hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the PSU and storage drives.
The two removable 4mm tempered glass panels located on each side of the case can be opened by pulling the front aluminum handle.
The mesh panels located on both sides of the PSU shroud area can be removed for cleaning when the front panel is unattached.
With ample interior room, the LANCOOL III can offer different cooling and usage scenarios.
With high airflow stock fans, and air tower clearance up to 185mm, the LANCOOL III is ideal for an air-cooling build.
With ample front intake, the LANCOOL III can provide strong performance for an AIO cooling build. The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an AIO with a 420 radiator/fan combo.
With the ability to support 3 × 360mm radiators simultaneously, the LANCOOL III can offer custom water-cooling enthusiasts, lots of imagination.
The LANCOOL III is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber.
The multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews.
The removable top fan bracket with offset fan mounting points allows for a thicker fan and radiator combo to be installed at the top of the LANCOOL III by providing enough clearance from the ram.
The adjustable modular PSU shroud bracket can accommodate 1 x 360mm radiator, 3 x 120mm fans, 3 x 2.5” SSDs, or a pump/reservoir combos.
Mounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket.
Multiple storage drive mounting locations are supported for up to 12 x 2.5” SSDs or 4 x 3.5” HDDs and 8 x 2.5” SSDs.
2 adjustable drive cages (each for 2 x 3.5” HDDs or 2 x 2.5” SSDs) can be individually removed or adjusted.
Two spring-loaded SDD trays located behind the motherboard tray allow for a toolless installation of the drives.
The side-mounted SSD trays located inside the right PSU shroud panel can support up to 3 x 2.5” SSDs or can be removed to improve airflow.
As the second chamber located on the right side is visible, great consideration has been given to cable management. The LANCOOL III features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables.
Holds 3 different sets of cables separately.
Provides a clear path for cables such as the CPU 8pin, fan cables, USB cables…
3 fan controllers/ fan hub mounting locations are provided between the large Velcro straps, with an additional one at the removable plate behind the motherboard.
Magnetic, hinged, and removable cable cover doors hide cable clusters and provide easy access at the same time.
By slightly loosening the two back thumb screws, the cable cover can be adjusted to fit different sizes of motherboards.
Optimized for PC locate on a desk, the front I/O can be relocated to the bottom of the chassis.
The removable PSU mounting bracket allows for PSU installation outside of the chassis, to then slide it in through from the rear.
A GPU anti-sag bracket is included for a seamless display of the hardware through the side tempered glass panels.
Lian Li Lancool III Mid Tower Gaming Case - White
User Controls
| User Controls | Power Reset |
Storage
| Internal Expansion Bays | 8 x 2.5" 4 x 2.5"/3.5" |
Expansion
| Expansion Slots | 8 x Full Height |
Interfaces/Ports
| USB Ports | 1 x USB-C 3.1 2 x USB 3.0 |
| Headphone Ports | 1 x 3.5mm Jack, shared with Microphone |
| Microphone In Port | 1 x 3.5mm Jack, shared with Headphone |
Electrical
| Cooling System | Front: Supports 3 x 140mm or 120mm fans (3 x 140mm fans included) Top: Supports 3 x 140mm or 120mm fans Rear: Supports 1 x 140mm or 120mm fan (140mm fan included) PSU Chamber: Supports 3 x 120mm fans |
| Power Supply | ATX Power Supply supported |
Physical
| Form Factor | Mid Tower Case |
| Case Colour | White |
| Material | Aluminium 0.8mm SGCC 4mm Tempered Glass |
| Motherboard Compatibility | E-ATX (under 280mm) ATX MicroATX Mini-ITX |
| Width | 238 mm |
| Depth | 526 mm |
| Height | 523 mm |
| Weight | 14.1 kg |
Warranty
| Warranty | 1 Year |
Key Features
| Firewire | |
| Power | W |
| Laptop Size Range | ins |
| Main Colour | White |
| External Expansion Bays | |
| Case Type | Tower |
| USB 3.0 Support | Yes |
| Case Form Factor | Mid Tower |
| Power Supply Included | No |
| Optimised for | Gaming |
| Modular Cables | |
| 80Plus Rated | No |
| Bag Size | |
| PSU Form Factor | ATX |
| Display Model in Showroom | |
| Illuminated | No |
| e-SATA | |
| L.E.D Fan | No LED |
| Laptop Size | |
| Max 3.5" Drives | 4 |
| External 5.25" Bay | |
| Max 2.5" Drives | 12 |
| ATX | Yes |
| Micro-ATX | Yes |
| ITX | Yes |
| E-ATX | Yes |
| XL-ATX | |
| Mini PC | |
| Cooler Height | 187 mm |
| Built-in Card Reader | No |
| USB Type-C Support | Yes |
| Front HDMI | No |
| Side Panel Type | Tempered Glass |
| GPU Length | 435 mm |
| PSU Depth | 220 mm |
| Memory Speed | MHz |
| Card Reader Type | |
| Front Audio Type | Combined |
| Number of Fans | 4 fan(s) |
| LED Controller Included | Yes |
| LED Strip(s) Included | |
| Maximum Motherboard Size Supported | E-ATX |
| RGB Software Type | |
| Total 2.5" + 3.5" drive bays | 12 |
| Power Requirement (auto) | 12 W |
| USB3.0 ports | 2 |
| USB-C ports | 1 |
| Low profile expansion | No |
Item Details
| Manufacturer | Lian Li |
| Manufacturer Code | LANCOOL 3-W |
| EAN | 4718466011787 |
| Condition | New |
Warranty Information
| Warranty | 1 Year |
Manufacturer Information
| Manufacturer | Lian Li |
| Manufacturer Code | LANCOOL 3-W |
Fast Next Day Delivery
Over 20 years of Supply, Service & Support
We Source Hard to Find and Legacy Computer Parts
Free Technical Support